# All Questions

200 questions
Filter by
Sorted by
Tagged with
209 views

### When should I use math markup?

Prompted by this suggested revision. Here is the body of the question as it appears in my browser (Chrome 40.0.2214.111 m): Marking up this paragraph with MathJax simply to introduce superscripts ...
160 views

### Should comments like “this belongs on EE.SE” be deleted?

Robert has made clear that, at least at this point in time, we should aim to accept questions from all engineering disciplines and not restrict our scope based on the existence of other engineering ...
156 views

### Community Ads to use in other sites

I just noticed your site and I'm happy you guys made it into beta; I wish you all the best in making this a great site. One nice way to let the world know about this site is via the Community Ads ...
191 views

### Should our beta icon be changed from Eg to Eng, or an icon?

I have noticed that Cognitive Sciences SE and probably others use three letters in their blue (beta) icon. Engineering uses two (Eg). It's non-intuitive, and I feel e.g. "Eng" would fit the name ...
86 views

### Is social engineering on topic?

I know there are other questions with great answers explaining the broad scope of Engineering as a topic, and how other sites should not influence how we define our scope. I agree with all that. ...
61 views

### Should some questions wait to be asked?

I couldn't find any discussion on any other stackexchange site on whether asking too many specific questions is good or bad at the beginning of a site. My concerns are: There may not be enough ...
56 views

### Are micro- and nanotechnology related questions on-topic?

Are micro- and nanotechnology (and micro- and nanosciences) related questions on-topic here? Some example questions could be How do you manufacture carbon nanotubes with a specific chirality? I want ...
65 views

### Questions purely on Electrical Engineering - here on EE.SE? [duplicate]

I understand questions that bridge engineering domains, involving electrical engineering but not limited to it should be welcome. What about questions like Motor Driver board: limited current? It's ...
279 views

### How to ask about the content of math education for engineers?

In our private beta, a university maths educator asked this follow up question: Math Engineers Use Did you find it beneficial to have about four semesters of calculus? Maybe you do not use ...
47 views

### How to encourage users to explain downvotes

It would be good to make sure / very strongly encourage users to explain every downvote. The commenting can be brief but at least point towards the high level reason for downvoting. I suspect there ...
35 views

### Have all the good questions from the Proposal been asked?

Have all of the good sample questions from the Proposal phase been officially asked here? I ask about "good" questions, because I will be the first to admit that my Proposal questions probably aren't ...
119 views

### Should ethics questions be allowed?

Engineering ethics is of concern to all practicing engineers. However, some ethical dilemmas can be difficult to resolve, and outside input may be useful in coming to a conclusion. Unfortunately, ...
87 views

### Are career related questions in or out?

Just found this question here: In Engineering fields, how often do you find yourself being asked to be a "salesperson", and what is your reaction? which is somewhat career related; ...
69 views

### Are questions about engineers on-topic?

History questions are on-topic, as evidenced by the engineering-history tag. In a similar vein, what about questions about engineers? We had a similar discussion on HSM, where it was decided that ...
153 views

### Should questions on schematics be allowed?

I am aware that most StackExchange websites consider questions regarding recommendations or where to find additional information as out of scope, since they generally atract too specific anwers or ...
125 views

### Is it appropriate to name suppliers and link to their products in answers?

So, a few times already I've found myself really wanting to drop the name of a commercial program or company that I use. I've specifically avoided doing so because I didn't want to endorse a ...
62 views

### Do we need a “homework” tag?

The consensus of this post is that homework questions should be allowed, so long as they satisfy certain criteria. That begs another question: Do we want a homework tag? The tag would have the ...
737 views

### What should our position be on homework-type questions?

This comes around as a direct result of this question, but I'm sure there will be more questions of a similar nature in the future. As commenters have noted, it sounds like a homework problem, but ...
47 views

88 views

### Canonical book recommendations versus Finding Things Questions

As a community, we've come down pretty clearly against "Finding things questions" (FTQ). That said, there are some edge cases that deserve additional consideration by the community. One case for us ...
64 views

### Delayed awarding of beta badges?

So we went public a few hours ago and I noticed that most of the other people who I remember interacting with in private beta have their shiny new beta badges but I don't see one on my profile. I've ...
274 views

### Are Questions About Engineering Software On-Topic? What questions?

A few days ago, I asked this question. On the one hand, it received a couple of upvotes and got a good answer, which also received a few upvotes. On the other hand, several people voted to close it as ...
399 views

### Who should our pro-tempore moderators be?

From The 7 Essential Questions of Every Beta: Discussing the criteria of a great moderator is important and picking out potential candidates is a great way to introduce outstanding contributors to ...
1k views

### How are we doing?

This post is to help the community track how we're doing as we progress through our private beta into a public beta and hopefully into a full-fledged SE site. Statistics are provided by the Area51 ...
142 views

### Change name of chat room?

Currently, our chat room is named "Engineering." While not terribly exciting, it does make the room pretty easy to find. The down side is that it's not terribly exciting and doesn't reflect much ...
251 views

### Field distribution of users: what kind of expertise do we have on our SE site

It would be nice to know, more or less, what is the expertise base that we have on Engineering SE. Instead of each person giving a separate answer akin to "Hi, I'm an X engineer", where X is their ...
204 views

### Engineering.SE manifesto

By the fifth day of our private beta, we have publicly lost our first user.1 The summary of their reasoning was that they felt the answers to a question they had asked mocked the premise of what the ...
81 views

### Biomedical Engineering: Where does the engineering stop and biomedical begin?

Aka: Is Estimating maximum lift or strength off topic? Looking at the definition of engineering: 1. the branch of science and technology concerned with the design, building, and use of engines, ...
109 views

### Once again, “Would experimental physics themed questions be on topic?”

This was originally asked by Sabre Tooth on Area 51 not too long ago. Perhaps it's relevant to put it on meta now that we're in beta, because although all the people here have clearly been on Area 51, ...
40 views

### Should we implement the mhchem package to be able to typeset chemical formulas?

When Im active on chemistry.SE, I use this feature, which allows you to typeset chemical formulas into the latex framework, a lot. And I can imagine quite a few circumstances where it could be handy e....
34 views

### How can we determine why our tag edits are being rejected?

I'm on my second try entering content for a tag excerpt on this site. Who is rejecting these, and how can I find out why? My first try must have been really bad for someone to decide that having ...
65 views

### What's the best way to do formatting for units?

I'm new to LaTeX, but I had a look at the docs and \sfrac looks like it would be nice for units, like $\frac{m}{s}$ (would look better with ...
69 views

### What should be do about cross postings?

I refer to this question, which was posted (or cross posted) on electrical engineering, and our site. https://electronics.stackexchange.com/questions/150511/how-can-i-measure-the-brightness-of-a-led ...
90 views

### Are history questions on topic?

This was inspired by What engineering advances paved the way for "modern" computers? Are history questions on-topic for Engineering.SE? We decided on HSM that history-of-engineering ...
23 views

### Why can't I edit someone's question?

I wanted to edit Additional jacking force to overcome stiction/dry friction to add the new "friction" tag, but the edit button is grayed out. Is this a bug, or is it a characteristic of the private ...
101 views

### Let's write tag wikis (sort of)!

We have accumulated quite a lot of tags throughout the first days or so, which is really good! They seem to be helping guide questions and categorize them better. Let's start writing descriptions! ...
104 views

### Surveying questions on topic?

Surveying can be a big part of civil engineering. Most of us have probably had to take a surveying class in college, but it isn't "Engineering" in a strict sense, and can be a separate field. A quick ...
59 views

### How should we promote our chat room?

When the web chat gets a reasonable population, we can think about how chat might complement Engineering.SE Please come and visit, and think about how to promote it. http://chat.stackexchange.com/...
279 views

### Do we need a disclaimer?

I haven't seen a disclaimer on a stack exchange site before; but a lot of the answers given on this site could constitute "professional advice", although I doubt anyone would intend them as such. ...
78 views

### Questions about conforming to legislation such as CE-marking - on topic?

For example, should my following question be on-topic? I have desperately looked for places to ask such questions, and was the main reason for joining the Engineering SE site (among others with ...
110 views

### What might the guidelines for hobbyist questions?

I have seen a number of questions that are asked by hobbyists, or others who are looking to learn more about engineering because they are inspired by something awesome they saw. It seems very prudent ...
184 views

### Don't forget those “high level” tags that target an engineering discipline

There is a huge potential in this site that lies in the same premise that made Stack Overflow one of the largest sites on the 'net — it united all the world's Programmers Engineers regardless of ...
90 views

### What should our reference policy be?

A lot of sites on Stack Exchange require - or at least strongly advise - users to include sources in their answers (and questions, when possible). Should we try to move in that direction? Requiring ...
103 views

### What is the scope of “Engineering” that this site covers? [duplicate]

Are there any disciplines of engineering that this site specifically excludes? It seems Electrical Engineering is covered by EE.SE, whereas Software Engineering is covered by StackOverflow and ...
721 views

### The Engineering.SE position on recommendation/finding stuff questions

In general, most Stack Exchange sites do not deal with recommendation questions such as: What is a good book to teach me x Please recommend a widget to help me <...
72 views

### What does the tag “quality” mean?

Well - obviously I understand the english word. But in the context this post, I dont see any use of it. Maybe there is - but a description would be nice. Or is it some kind of meta-tag for describing "...
434 views

### Our Scope (and Overlaps with Sister Sites)

This question arises in part from my first question (since deleted). I realized while asking this that perhaps it had already been asked at Aviation Stack Exchange. While they do indeed have an "...
73 views

### Why doesn't Engineering support MathJax syntax?

There are a number of communities in the Stack Exchange network that use MathJax to allow for rendering of mathematical expressions. Some that come to mind are Math and Physics. In my opinion, ...